CyberRevision
Continue revision → ← Subjects
Complete networking bank

All 5,000 questions.

Search the curriculum, filter by level, check your saved status, or open any question in revision mode.

0 answered overall

Showing 351–400 of 5,000 matching questions

50 per page
0351
Level 1 · Very Basic Performance Unanswered

For a cloud migration threat model, why is understanding "latency" technically important?

View answer choices
  1. The number of addresses in a subnet.
  2. The strength of an encryption key.
  3. The time required for data to travel from source to destination.
  4. The maximum capacity of a link.
Practice →
0352
Level 1 · Very Basic Performance Unanswered

For a cloud migration threat model, why is understanding "throughput" technically important?

View answer choices
  1. The number of router interfaces.
  2. The physical length of a packet.
  3. The theoretical speed printed on a cable.
  4. The actual rate of useful data successfully transferred.
Practice →
0353
Level 1 · Very Basic Performance Unanswered

For a cloud migration threat model, why is understanding "packet loss" technically important?

View answer choices
  1. The condition in which some transmitted packets fail to reach the destination.
  2. A successful DNS resolution.
  3. An increase in cable bandwidth.
  4. A method of assigning MAC addresses.
Practice →
0354
Level 1 · Very Basic Media Unanswered

For a cloud migration threat model, why is understanding "wired network" technically important?

View answer choices
  1. A network that must use radio for every device.
  2. A network that cannot connect to the Internet.
  3. A network that uses physical media such as copper or fiber for links.
  4. A network with no addresses.
Practice →
0355
Level 1 · Very Basic Wireless Unanswered

For a cloud migration threat model, why is understanding "Wi-Fi" technically important?

View answer choices
  1. A family of IEEE 802.11 technologies for wireless local area networking.
  2. A connector used only with coaxial cable.
  3. A protocol that assigns IPv4 addresses.
  4. A standard for long-haul fiber routing.
Practice →
0356
Level 1 · Very Basic Wireless Unanswered

For a cloud migration threat model, why is understanding "SSID" technically important?

View answer choices
  1. The password encryption algorithm itself.
  2. The MAC address of every client.
  3. The IP route used as a default.
  4. The human-readable name that identifies a Wi-Fi network.
Practice →
0357
Level 1 · Very Basic Media Unanswered

For a cloud migration threat model, why is understanding "Ethernet cable" technically important?

View answer choices
  1. Copper or fiber media used to carry Ethernet signals between interfaces.
  2. A database containing website names.
  3. An application-layer email protocol.
  4. A secret used to authenticate users.
Practice →
0358
Level 1 · Very Basic Media Unanswered

For a cloud migration threat model, why is understanding "UTP cable" technically important?

View answer choices
  1. A glass medium that transmits pulses of light.
  2. A logical tunnel through the Internet.
  3. Twisted-pair copper cable without an overall metallic shield.
  4. A coaxial cable used only for television.
Practice →
0359
Level 1 · Very Basic Media Unanswered

For a cloud migration threat model, why is understanding "fiber-optic cable" technically important?

View answer choices
  1. A medium that carries data as light and resists electromagnetic interference.
  2. A wireless frequency range.
  3. A list of IP routes.
  4. A copper medium that uses electrical pulses only.
Practice →
0360
Level 1 · Very Basic Media Unanswered

For a cloud migration threat model, why is understanding "RJ45-style Ethernet connector" technically important?

View answer choices
  1. A protocol number in an IP header.
  2. A wireless authentication method.
  3. A connector used to join optical fibers directly.
  4. The common modular connector used on twisted-pair Ethernet patch cables.
Practice →
0361
Level 1 · Very Basic Performance Unanswered

A security engineer documents "latency" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The time required for data to travel from source to destination.
  2. The number of addresses in a subnet.
  3. The maximum capacity of a link.
  4. The strength of an encryption key.
Practice →
0362
Level 1 · Very Basic Performance Unanswered

A security engineer documents "throughput" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The physical length of a packet.
  2. The actual rate of useful data successfully transferred.
  3. The theoretical speed printed on a cable.
  4. The number of router interfaces.
Practice →
0363
Level 1 · Very Basic Performance Unanswered

A security engineer documents "packet loss" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The condition in which some transmitted packets fail to reach the destination.
  2. A method of assigning MAC addresses.
  3. An increase in cable bandwidth.
  4. A successful DNS resolution.
Practice →
0364
Level 1 · Very Basic Media Unanswered

A security engineer documents "wired network" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A network that must use radio for every device.
  2. A network with no addresses.
  3. A network that cannot connect to the Internet.
  4. A network that uses physical media such as copper or fiber for links.
Practice →
0365
Level 1 · Very Basic Wireless Unanswered

A security engineer documents "Wi-Fi" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A protocol that assigns IPv4 addresses.
  2. A standard for long-haul fiber routing.
  3. A family of IEEE 802.11 technologies for wireless local area networking.
  4. A connector used only with coaxial cable.
Practice →
0366
Level 1 · Very Basic Wireless Unanswered

A security engineer documents "SSID" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The IP route used as a default.
  2. The human-readable name that identifies a Wi-Fi network.
  3. The password encryption algorithm itself.
  4. The MAC address of every client.
Practice →
0367
Level 1 · Very Basic Media Unanswered

A security engineer documents "Ethernet cable" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. Copper or fiber media used to carry Ethernet signals between interfaces.
  2. An application-layer email protocol.
  3. A secret used to authenticate users.
  4. A database containing website names.
Practice →
0368
Level 1 · Very Basic Media Unanswered

A security engineer documents "UTP cable" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A glass medium that transmits pulses of light.
  2. A logical tunnel through the Internet.
  3. A coaxial cable used only for television.
  4. Twisted-pair copper cable without an overall metallic shield.
Practice →
0369
Level 1 · Very Basic Media Unanswered

A security engineer documents "fiber-optic cable" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. A medium that carries data as light and resists electromagnetic interference.
  2. A wireless frequency range.
  3. A copper medium that uses electrical pulses only.
  4. A list of IP routes.
Practice →
0370
Level 1 · Very Basic Media Unanswered

A security engineer documents "RJ45-style Ethernet connector" during an industrial network security review. Which definition belongs in the report?

View answer choices
  1. The common modular connector used on twisted-pair Ethernet patch cables.
  2. A wireless authentication method.
  3. A protocol number in an IP header.
  4. A connector used to join optical fibers directly.
Practice →
0371
Level 1 · Very Basic Performance Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "latency". What is the accurate meaning?

View answer choices
  1. The maximum capacity of a link.
  2. The time required for data to travel from source to destination.
  3. The strength of an encryption key.
  4. The number of addresses in a subnet.
Practice →
0372
Level 1 · Very Basic Performance Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "throughput". What is the accurate meaning?

View answer choices
  1. The number of router interfaces.
  2. The theoretical speed printed on a cable.
  3. The actual rate of useful data successfully transferred.
  4. The physical length of a packet.
Practice →
0373
Level 1 · Very Basic Performance Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "packet loss". What is the accurate meaning?

View answer choices
  1. A successful DNS resolution.
  2. An increase in cable bandwidth.
  3. A method of assigning MAC addresses.
  4. The condition in which some transmitted packets fail to reach the destination.
Practice →
0374
Level 1 · Very Basic Media Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "wired network". What is the accurate meaning?

View answer choices
  1. A network with no addresses.
  2. A network that cannot connect to the Internet.
  3. A network that uses physical media such as copper or fiber for links.
  4. A network that must use radio for every device.
Practice →
0375
Level 1 · Very Basic Wireless Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "Wi-Fi". What is the accurate meaning?

View answer choices
  1. A standard for long-haul fiber routing.
  2. A family of IEEE 802.11 technologies for wireless local area networking.
  3. A connector used only with coaxial cable.
  4. A protocol that assigns IPv4 addresses.
Practice →
0376
Level 1 · Very Basic Wireless Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "SSID". What is the accurate meaning?

View answer choices
  1. The human-readable name that identifies a Wi-Fi network.
  2. The MAC address of every client.
  3. The password encryption algorithm itself.
  4. The IP route used as a default.
Practice →
0377
Level 1 · Very Basic Media Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "Ethernet cable". What is the accurate meaning?

View answer choices
  1. A database containing website names.
  2. An application-layer email protocol.
  3. A secret used to authenticate users.
  4. Copper or fiber media used to carry Ethernet signals between interfaces.
Practice →
0378
Level 1 · Very Basic Media Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "UTP cable". What is the accurate meaning?

View answer choices
  1. Twisted-pair copper cable without an overall metallic shield.
  2. A coaxial cable used only for television.
  3. A logical tunnel through the Internet.
  4. A glass medium that transmits pulses of light.
Practice →
0379
Level 1 · Very Basic Media Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "fiber-optic cable". What is the accurate meaning?

View answer choices
  1. A copper medium that uses electrical pulses only.
  2. A medium that carries data as light and resists electromagnetic interference.
  3. A list of IP routes.
  4. A wireless frequency range.
Practice →
0380
Level 1 · Very Basic Media Unanswered

While mapping attack paths in a managed-service-provider audit, the team discusses "RJ45-style Ethernet connector". What is the accurate meaning?

View answer choices
  1. The common modular connector used on twisted-pair Ethernet patch cables.
  2. A connector used to join optical fibers directly.
  3. A protocol number in an IP header.
  4. A wireless authentication method.
Practice →
0381
Level 1 · Very Basic Performance Unanswered

An analyst validating a government zero-trust rollout sees "latency". Which technical explanation should be used?

View answer choices
  1. The number of addresses in a subnet.
  2. The strength of an encryption key.
  3. The maximum capacity of a link.
  4. The time required for data to travel from source to destination.
Practice →
0382
Level 1 · Very Basic Performance Unanswered

An analyst validating a government zero-trust rollout sees "throughput". Which technical explanation should be used?

View answer choices
  1. The actual rate of useful data successfully transferred.
  2. The number of router interfaces.
  3. The physical length of a packet.
  4. The theoretical speed printed on a cable.
Practice →
0383
Level 1 · Very Basic Performance Unanswered

An analyst validating a government zero-trust rollout sees "packet loss". Which technical explanation should be used?

View answer choices
  1. A successful DNS resolution.
  2. A method of assigning MAC addresses.
  3. The condition in which some transmitted packets fail to reach the destination.
  4. An increase in cable bandwidth.
Practice →
0384
Level 1 · Very Basic Media Unanswered

An analyst validating a government zero-trust rollout sees "wired network". Which technical explanation should be used?

View answer choices
  1. A network with no addresses.
  2. A network that must use radio for every device.
  3. A network that uses physical media such as copper or fiber for links.
  4. A network that cannot connect to the Internet.
Practice →
0385
Level 1 · Very Basic Wireless Unanswered

An analyst validating a government zero-trust rollout sees "Wi-Fi". Which technical explanation should be used?

View answer choices
  1. A protocol that assigns IPv4 addresses.
  2. A connector used only with coaxial cable.
  3. A standard for long-haul fiber routing.
  4. A family of IEEE 802.11 technologies for wireless local area networking.
Practice →
0386
Level 1 · Very Basic Wireless Unanswered

An analyst validating a government zero-trust rollout sees "SSID". Which technical explanation should be used?

View answer choices
  1. The MAC address of every client.
  2. The IP route used as a default.
  3. The human-readable name that identifies a Wi-Fi network.
  4. The password encryption algorithm itself.
Practice →
0387
Level 1 · Very Basic Media Unanswered

An analyst validating a government zero-trust rollout sees "Ethernet cable". Which technical explanation should be used?

View answer choices
  1. A database containing website names.
  2. A secret used to authenticate users.
  3. Copper or fiber media used to carry Ethernet signals between interfaces.
  4. An application-layer email protocol.
Practice →
0388
Level 1 · Very Basic Media Unanswered

An analyst validating a government zero-trust rollout sees "UTP cable". Which technical explanation should be used?

View answer choices
  1. Twisted-pair copper cable without an overall metallic shield.
  2. A glass medium that transmits pulses of light.
  3. A coaxial cable used only for television.
  4. A logical tunnel through the Internet.
Practice →
0389
Level 1 · Very Basic Media Unanswered

An analyst validating a government zero-trust rollout sees "fiber-optic cable". Which technical explanation should be used?

View answer choices
  1. A copper medium that uses electrical pulses only.
  2. A list of IP routes.
  3. A wireless frequency range.
  4. A medium that carries data as light and resists electromagnetic interference.
Practice →
0390
Level 1 · Very Basic Media Unanswered

An analyst validating a government zero-trust rollout sees "RJ45-style Ethernet connector". Which technical explanation should be used?

View answer choices
  1. A connector used to join optical fibers directly.
  2. The common modular connector used on twisted-pair Ethernet patch cables.
  3. A wireless authentication method.
  4. A protocol number in an IP header.
Practice →
0391
Level 1 · Very Basic Performance Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "latency" is correct?

View answer choices
  1. The number of addresses in a subnet.
  2. The strength of an encryption key.
  3. The time required for data to travel from source to destination.
  4. The maximum capacity of a link.
Practice →
0392
Level 1 · Very Basic Performance Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "throughput" is correct?

View answer choices
  1. The number of router interfaces.
  2. The physical length of a packet.
  3. The theoretical speed printed on a cable.
  4. The actual rate of useful data successfully transferred.
Practice →
0393
Level 1 · Very Basic Performance Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "packet loss" is correct?

View answer choices
  1. The condition in which some transmitted packets fail to reach the destination.
  2. A successful DNS resolution.
  3. An increase in cable bandwidth.
  4. A method of assigning MAC addresses.
Practice →
0394
Level 1 · Very Basic Media Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "wired network" is correct?

View answer choices
  1. A network that must use radio for every device.
  2. A network that uses physical media such as copper or fiber for links.
  3. A network that cannot connect to the Internet.
  4. A network with no addresses.
Practice →
0395
Level 1 · Very Basic Wireless Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "Wi-Fi" is correct?

View answer choices
  1. A family of IEEE 802.11 technologies for wireless local area networking.
  2. A connector used only with coaxial cable.
  3. A protocol that assigns IPv4 addresses.
  4. A standard for long-haul fiber routing.
Practice →
0396
Level 1 · Very Basic Wireless Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "SSID" is correct?

View answer choices
  1. The MAC address of every client.
  2. The IP route used as a default.
  3. The password encryption algorithm itself.
  4. The human-readable name that identifies a Wi-Fi network.
Practice →
0397
Level 1 · Very Basic Media Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "Ethernet cable" is correct?

View answer choices
  1. Copper or fiber media used to carry Ethernet signals between interfaces.
  2. An application-layer email protocol.
  3. A database containing website names.
  4. A secret used to authenticate users.
Practice →
0398
Level 1 · Very Basic Media Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "UTP cable" is correct?

View answer choices
  1. A glass medium that transmits pulses of light.
  2. Twisted-pair copper cable without an overall metallic shield.
  3. A logical tunnel through the Internet.
  4. A coaxial cable used only for television.
Practice →
0399
Level 1 · Very Basic Media Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "fiber-optic cable" is correct?

View answer choices
  1. A medium that carries data as light and resists electromagnetic interference.
  2. A list of IP routes.
  3. A wireless frequency range.
  4. A copper medium that uses electrical pulses only.
Practice →
0400
Level 1 · Very Basic Media Unanswered

During lessons learned from a multinational enterprise breach simulation, which statement about "RJ45-style Ethernet connector" is correct?

View answer choices
  1. A protocol number in an IP header.
  2. A wireless authentication method.
  3. A connector used to join optical fibers directly.
  4. The common modular connector used on twisted-pair Ethernet patch cables.
Practice →